|
Now go back to the bg copy layer, or whichever layers you did your sketches on and erase the sketch completely leaving only the lineart behind (which is on the top layer)
And easy way to erase the sketch is to go the second layer ( or which ever layer you sketched on) and press Ctrl+A,to select the whole canvas and then press delete, either on the menu or on your keyboard. Now your sketch is gone :3
TIP
if you really what to enhance your lineart try thickening the corners of image. I personally don’t use this technique too often because if is pretty tedious but if u want to you can try and the end result is pretty neat.
I cannot tell u where exactly to thicken the lines, it is usually a judgement call but 2 rules u can follow.
1. darken lines opposite of the light source. For example in this picture the light source is coming from the right, Hence most of the the thicker lines are on the left.
2. Darken corners and curves on the picture. As the arrows point I have darken bends and corners.
REMEMBER
You have to this, the lineart on the top layer. Because it is very easy to forget and accidentally do it on the second or last layer. If you this you will be very very screwed.
|